{"title":"Nissan Navara","description":null,"products":[{"product_id":"1st-gen-frontier-high-clearance-front-bumper-kit","title":"1st Gen Frontier High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 1st generation (1997-2004) Nissan Frontier. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Frontier. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 99lbs through careful design work.. We offer specific versions for the 1997-2000 and 2001-2004 Frontiers to ensure a perfect fit for the pre and post facelift vehicles!\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 1st generation (1997-2004) Nissan Frontier as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Nissan Frontier owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. Unlike other bumpers on the market that only mount to the thin corrugated frame horns, this bumper uses a total of 8 bolts to solidly mount it to both the frame rail ends and the factory recovery points. This distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper also has a built in lower skid plate that provides a smooth surface to slide across trail obstacles and leaves no possible way for trail debris to find its way into your vulnerable engine bay parts. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Nissan Frontier frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Nissan Frontier frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Nissan Frontier frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 99lbs for the steel bumper and 49lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Nissan Frontier is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (52lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264244830492,"sku":"CO0799","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f5de4c2d-6cb0-4160-b56c-760fc9ba07fc.jpg?v=1783512998"},{"product_id":"2nd-gen-frontier-high-clearance-front-bumper-kit","title":"2nd Gen Frontier High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 2nd generation (2005-2021) Nissan Frontier. It features a bolt-on design, protected winch mount, and the best approach angle of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Frontier. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 91lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2005-2020) Nissan Frontier as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Nissan Frontier owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. This bumper uses a total of 8 factory mounting points to solidly mount it to the frame. This distributes impact and winching forces evenly across your frame and makes for the stiffest mounting interface of any bumper on the market. This bumper is also available with an optional lower skid plate that provides a smooth surface to slide across trail obstacles and protects your vulnerable engine bay parts. This skid plate is fully CNC-bent into shape and only requires two very small 1\" long welds to complete it. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is also CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with 4 integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Nissan Frontier frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Nissan Frontier frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Nissan Frontier frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. The low profile design has resulted in very reasonable weights of 91lbs for the steel bumper and 45lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Nissan Frontier is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003e\u003cb\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/b\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e\u003cb\u003eBumper comes with 4 square light cut outs (2 per side) as standard,\u003c\/b\u003e regardless of if you add our lights or not. If you would like to omit any of these light cut outs or do custom cut outs such as a light bar, please leave a detailed note in your order comments and we'll make it happen.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAvailable with Factory Parking Sensor Cut outs - Please email us or put a comment in your order notes section to receive this option.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 3\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (46lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8  factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThe bumper center section in the last picture bumper can be ordered on its own by special request if you would like to make your own hybrid tubing side wings (Please email us for details)\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264244863260,"sku":"CO0782","price":843.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_56f5b5c2-02d1-4e66-bed3-733111ee3235.jpg?v=1783513653"},{"product_id":"2nd-gen-frontier-high-clearance-rear-bumper-kit","title":"2nd Gen Frontier High Clearance Rear Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together plate bumper kit for the 2nd generation (2005-2020) Nissan Frontier. It features heavy duty 3\/16\" plate steel or 1\/4\" aluminum construction, optional swing out carriers, recessed 2\" hitch receiver, and the best departure angle on the market. This bumper provides substantially increased ground clearance and rear end protection over the stock bumper. By cutting the factory bedsides up to the bottom of the tail lights, this bumper replaces the most vulnerable part of the truck's bed with low profile plate side wings that will protect your Frontier from trail obstacles and inattentive drivers alike.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear of the Nissan Frontier as possible, while the recessed hitch receiver and angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. These features make a very noticeable difference during deep ditch crossing and steep obstacle climbs where other aftermarket bumpers with bulky rear profiles and protruding hitch receivers will hang up and impede progress on the trail. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your Frontier! \u003c\/p\u003e\u003cp\u003eUnlike many aftermarket bumpers that are more or less empty shells with minimal reinforcement, this bumper contains extensive internal ribbing and mounts directly to factory holes in bottom and sides of the Frontier's frame for unmatched strength and stiffness. The side wings of this bumper wrap around to the rear wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Nissan Frontier owners want to run oversized tires, which often create interference and rubbing issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with optional single and dual swing out carriers, a high clearance hitch receiver, LED pod lights (custom cut outs available by request), and heavy duty 9\/16\" recovery points that are placed directly in line with the Nissan Frontier frame to eliminate any leveraging effects. These recovery points are formed out of laser cut steel plates that pass through the bumper shell and tie directly into the bumper's main mounting points on the Nissan Frontier frame. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Nissan Frontier frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 120lbs for the steel bumper and 59lbs for the aluminum version. Considering that this bumper replaces your factory bumper, bedside corners, hitch receiver and associated components, the resulting weight increase to your Nissan Frontier is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eThe swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to \u003cstrong\u003e37\" in diameter! \u003c\/strong\u003eBoth carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSlim profile is engineered to provide maximum departure angles and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWrap-around side wings maximize protection and ground clearance \u003cb\u003e(Cutting of factory bedsides required)\u003c\/b\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum construction for a lightweight yet very durable overlanding setup (61lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecessed 2\" hitch receiver for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMounts directly to frame using 12 factory mounting points for unbeatable strength and no drilling required. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBumper is pre-drilled with mounting holes for a license plate. If you'd like to get it up higher, our dual swing out comes with a license plate mounting location. Or, for non-swing out bumpers use our No-Drill Tailgate License Plate Mount, which can be found \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/co12970-no-drill-tailgate-license-plate-mount-12970#attr=\"\u003eHere\u003c\/a\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only) \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264244896028,"sku":"CO7570","price":880.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_1166522b-b1cd-4848-b96d-d87f92c6a547.jpg?v=1783513654"},{"product_id":"2nd-gen-frontier-kickout-rock-slider-weld-together-kit-bolt-on","title":"2nd Gen Frontier Kickout Rock Slider Weld-Together Kit (Bolt-on)","description":"\u003cp\u003eThese aren't your average round tube sliders. The inner rails and mounting legs are made from 2x2\" heavy wall square tubing and finished with large 1\/4\" thick CNC-cut and bent frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them. We bend the frame mounting brackets in-house, with each bracket custom tailored to the Frontier's frame profile at each mounting point. This allows us to mount these sliders to the truck using all factory holes in the Frontier's frame. No frame drilling, welding or modification required. Our C-shaped frame mounting brackets wrap around the outer, bottom and inner faces of the frame, and then we run bolts through the outer and inner walls of the frame and into nuts that get secured on the backside. This means that in order for these rock sliders to fail, you would have to simultaneously snap the heads off the bolts and deform the 1\/4\" thick steel brackets enough to lift away from your frame! You can rest assured that these sliders will hold up to whatever trail hits you can throw at them.\u003c\/p\u003e\u003cp\u003eThis mounting design also ensures that those big trail impacts will get spread out over a large area of your truck's frame. Some sliders use skimpy round tubing mounting legs that mount directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through the vehicle's frame under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.\u003c\/p\u003e\u003cp\u003eThese sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck.  To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by CAD diagrams. The 6 (3 per side) mounting legs in this kit ship pre-cut with the perfect angles and lengths so the sliders can be positioned at the perfect angle and distance from the vehicle without any guess work or frustrating angle cuts. The pictured sliders are set at a 10 degree angle to provide great ground clearance and a convenient step to reach your roof rack or truck bed. You can also adjust the angle up or down while assembling the sliders if you wish to have a flatter or more extreme slider angle.\u003c\/p\u003e\u003cp\u003e• DIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together - everything you need for assembly and installation included\u003c\/p\u003e\u003cp\u003e•NO Drilling, cutting or welding of the actual vehicle required - these sliders can be removed from your Nissan Frontier without a trace that they were ever installed.\u003c\/p\u003e\u003cp\u003e• Detailed instructions and diagrams - the step by step directions and professionally made diagrams make these a perfect first welding project\u003c\/p\u003e\u003cp\u003e•Fits 4 Door and Extended Cab Models\u003c\/p\u003e\u003cp\u003e• CNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access to the cabin, roof rack and pickup bed\u003c\/p\u003e\u003cp\u003e•84\" Length provides full wheel well to wheel well protection\u003c\/p\u003e\u003cp\u003e• 2 x 2\" heavy wall square tubing inner rails provide excellent foundational support compared to lesser round tube sliders\u003c\/p\u003e\u003cp\u003e•C-shaped 1\/4\" thick frame mounting brackets and gussets are CNC-bent in house. These distribute forces evenly into your vehicle frame to prevent damage\u003c\/p\u003e\u003cp\u003e•Hilift jack can be used anywhere along the slider length to lift the vehicle\u003c\/p\u003e\u003cp\u003e• 45 degree tapered inner rails to glance off obstacles\u003c\/p\u003e\u003cp\u003e• Sold in pairs\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264244928796,"sku":"CO119814","price":860.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_c961a2e9-7e84-46d7-b7a5-4153f2e58eae.jpg?v=1783515611"},{"product_id":"3rd-generation-2022-nissan-frontier-kickout-rock-slider-weld-together-kit-bolt-on","title":"3rd Generation (2022+) Nissan Frontier Kickout Rock Slider Weld-Together Kit (Bolt on)","description":"\u003cp\u003eThis is a DIY weld-together rock slider kit for the 3rd generation (2022+) Nissan Frontier. While the sliders themselves are a weld-together kit, absolutely no welding, drilling or cutting of the actual vehicle is required! We specifically designed these sliders to be a modification-free installation so they can be removed from the vehicle without leaving a trace that they were ever there. However, don't think for a second that this means the sliders aren't built for heavy offroad hits. These sliders mount directly to your Nissan Frontier's frame using C-shaped 1\/4\" thick steel mounting plates that wrap around the outer, bottom and inner walls of the truck's main frame rail. We finish these off with heavy gauge square tubing inner legs and the largest reinforcing gussets that we could fit under there.\u003c\/p\u003e\u003cp\u003eThese aren't your average round tube sliders. The inner rails and mounting legs are made from 2x2\" heavy wall square tubing and finished with large 1\/4\" thick CNC-cut and bent frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them. We bend the frame mounting brackets in-house, with each bracket custom tailored to the Frontier's frame profile at each mounting point. This allows us to mount these sliders to the truck using all factory holes in the Frontier's frame. No frame drilling, welding or modification required. Our C-shaped frame mounting brackets wrap around the outer, bottom and inner faces of the frame, and then we run bolts through the outer and inner walls of the frame and into nuts that get secured on the backside. This means that in order for these rock sliders to fail, you would have to simultaneously snap the heads off the bolts and deform the 1\/4\" thick steel brackets enough to lift away from your frame! You can rest assured that these sliders will hold up to whatever trail hits you can throw at them.\u003c\/p\u003e\u003cp\u003eThis mounting design also ensures that large impacts will get spread out over a large area of your truck's frame. Some sliders use skimpy round tubing mounting legs that mount directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through the vehicle's frame under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.\u003c\/p\u003e\u003cp\u003eThese sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck.  To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by CAD diagrams. The 6 (3 per side) mounting legs in this kit ship pre-cut with the perfect angles and lengths so the sliders can be positioned at the perfect angle and distance from the vehicle without any guess work or frustrating angle cuts. The pictured sliders are set at a 10 degree angle to provide great ground clearance and a convenient step to reach your roof rack or truck bed. You can also adjust the angle up or down while assembling the sliders if you wish to have a flatter or more extreme slider angle.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together - everything you need for assembly and installation included\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNO Drilling, cutting or welding of the actual vehicle required - these sliders can be removed from your Nissan Frontier without a trace that they were ever installed.\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDetailed instructions and diagrams - the step by step directions and professionally made diagrams make these a perfect first welding project\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFits 4 Door and Extended Cab Models\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access to the cabin, roof rack and pickup bed\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e84\" Length provides full wheel well to wheel well protection\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2 x 2\" heavy wall square tubing inner rails provide excellent foundational support compared to lesser round tube sliders\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eC-shaped 1\/4\" thick frame mounting brackets and gussets are CNC-bent in house. These distribute forces evenly into your vehicle frame to prevent damage\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHilift jack can be used anywhere along the slider length to lift the vehicle\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e45 degree tapered inner rails to glance off obstacles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSold in pairs\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264245223708,"sku":"CO95001","price":860.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_2f6c1b41-5915-4b59-907e-e32fc7e70c73.jpg?v=1783514362"},{"product_id":"2005-nissan-frontier-xterra-pathfinder-skid-plate-set","title":"2005+ Nissan Frontier Xterra Pathfinder Skid Plate Set","description":"\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cspan style=\"font-weight: bolder;\"\u003eImportant Note: \u003c\/span\u003eDirect fit for 2005-2015 Xterra's only - Frontier and Pathfinder versions coming soon. At this time, the front 3 skid plates of this set will fit the Frontier and Pathfinder, however skid plates 4 and 5 will require modification. \u003c\/p\u003e\u003cp\u003eThis is a welded skid plate set for the 2nd generation (2005-2015) Nissan Xterra. Just add the paint or coating of your choice and bolt them on. This 5-piece set mounts using all factory mounting points (no drilling required) and provides excellent protection of the radiator, front differential, engine oil pan, steering rack, transmission, transfer case and gas tank. Nothing under your Nissan is left unprotected. To maximize ground clearance, we use a front plate that tucks in as close to the frame as possible, providing the best approach angle of any skid plate set on the market. We've added tons of sheet metal bends at the highest impact area as well as multiple welded ribs that run the length of the skid set. \u003cspan style=\"text-align: inherit;\"\u003eThe photos show a pre-welding mock up. However on your skid plate set, all seams between bent flanges will be welded shut for additional strength. \u003c\/span\u003eThese features make these skid plates drastically stronger than other skid plates on the market which are simply bent into shape with little to no reinforcements and inadequate mounts. Ensure that your vehicle's expensive drivetrain components are protected from the sheer force of its own weight!\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWhen designing this skid plate set, we set out to strike the optimum balance of protection, ground clearance and weight. While this skid plate set provides total protection of the engine, drivetrain and gas tank components, it at the same time avoids covering any areas that are unnecessary. This minimizes the size of the low-points that the skid plates create as well as keeps the weight as low as possible. In fact, this entire set weighs 149lbs in 3\/16″ steel or 51lbs in 3\/16″ aluminum, which helps preserve your vehicles payload capacity and fuel economy. This is especially noteworthy when you consider the amount of reinforcements we’ve used in the high impact areas of this skid plate set. We also give you the option to mix and match - should you want steel at the highest impact areas and aluminum in the less critical locations. \u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eStarting at the front edge of the engine skid plate, we mount this plate to our front bumper (optional) \u003cb\u003eand\u003c\/b\u003e main frame rails using 6 mounting points. While this is totally overkill, it ensures impact forces are distributed evenly over your Nissan's frame and gives extra mounting options in case some of your factory mounting points are rusted or otherwise damaged.  Moving to the front bottom edge of the engine skid, this is by far the area that sees the hardest and most frequent impacts on the trail. To account for this, we integrated 6 CNC-bends into this skid and mounted it against a large surface area of the vehicle’s frame. This makes this area of the skid plate nearly indestructible and will distribute those hard trail impacts over as large of a section of the vehicle’s frame as possible. At the rear edge of the engine skid plate, we use 2 more large thru-bolts and a nut plate to mount it to the front differential crossmember.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eFor the rear skid plates, we use large vertical ribs that span the length between each frame crossmember. These ribs fit tightly between the frame crossmembers, eliminating any weak points where the skid plate will bend under a hard impact. The fitment and size of these reinforcing ribs makes this skid plate extremely stiff with minimal weight gain over a simple flat skid plate. While the bolt heads on the bottom of this skid plate are exposed, all of these mounting points use long thru-bolts that thread into nuts placed on the topside of each frame crossmember. This means that any damaged bolt heads can still be easily removed via the nuts on top, which are very well protected and out of harms way. We prefer this solution over bolt protection rings welded to the bottom side of the skid plate like some other skid plate sets use. These protection rings increase the size of the low hang-up points and often end up getting smooshed against the bolt heads anyways in the event of hard trail impacts! These skid plates are offset to the driver side to reduce their footprint under the vehicle, minimizing additional weight and unnecessary ground clearance losses.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cspan style=\"font-weight: bolder;\"\u003e• NO WELDING REQUIRED – This skid plate set ships already welded and left as bare, unpainted metal - ready for the color of your choice. Simply add paint\/powdercoat and bolt them up to your Nissan using the included hardware.\u003c\/span\u003e\u003cbr\u003e•The photos show a pre-welding mock up. However on your skid plate set, all seams between bent flanges will be welded shut for additional strength \u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cb\u003e•\u003c\/b\u003eDirect fit for 2005-2015 Xterra's only - Frontier and Pathfinder versions coming soon. At this time, the front 3 skid plates of this set will fit the Frontier and Pathfinder, however skid plates 4 and 5 will require modification. \u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-style: inherit; font-variant-ligatures: inherit; font-variant-caps: inherit; font-weight: inherit; text-align: inherit;\"\u003e•Complete 5-piece set that provides excellent protection of the radiator, front differential, engine oil pan, steering rack, transmission, transfer case and gas tank\u003c\/span\u003e\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e•Coastal Offroad Tree Logo Cut into front skid plate\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e•Heavy duty 3\/16″ plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e•Engine oil drainage hole allows for oil changes without removing the skid plates.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e•Optional 3\/16″ 5052 aluminum construction for a lightweight yet very durable overlanding setup (98lb weight savings)\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e• Maximum ground clearance and approach angle – all skid plates are optimized to provide as much ground clearance as possible\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e• All skid plates bolt directly to frame using  factory mounting points – no drilling required\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264245256476,"sku":"CO13077","price":1222.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_6bd3c4de-77c5-4878-a46e-8b99b4a3e750.jpg?v=1783516722"}],"url":"https:\/\/shop-nz.dev-everfruitdigital.com\/collections\/nissan-navara.oembed","provider":"Coastal Offroad","version":"1.0","type":"link"}