{"title":"Toyota Tacoma","description":null,"products":[{"product_id":"1st-gen-tacoma-closed-top-front-bumper-kit","title":"1st Gen Tacoma Closed Top Front Bumper Kit","description":"\u003cp\u003eThis is our new closed top winch bumper DIY weld-together kit for the 1st generation (1995.5-2004) Toyota Tacoma. This bumper is based on our original open-top winch bumper that is the tightest fitting and highest clearance winch bumper on the market. This bumper is different in that the winch sits entirely enclosed within the bumper, thus eliminating the need to trim your grill to install a winch. We have managed to do this while still keeping a very low profile bumper that only protrudes 4\" from the center of the grill. This high clearance design allows you to forget about approach angles and substantially improves the offroad capability of your Tacoma! It offers excellent protection from trail obstacles, animal strikes and inattentive drivers and has been kept to a weight of 89lbs through careful design work. The main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 1st gen Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with integrated light buckets for surface mount LED pod lights (custom light cut outs available by request), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 89lbs for the steel bumper and 44lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 4\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (45lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eBolts directly to frame using a total of 8 mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eTwo integrated LED pod mounts – included slotted mounting tabs give tons of adjustment to fit a variety of lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eIntegrated turn signal cut outs \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp class=\"p1\"\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241488156,"sku":"CO10747","price":825.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_4843a0f2-5371-43ff-875c-2eb6a7e29be2.jpg?v=1783513000"},{"product_id":"1st-gen-tacoma-high-clearance-rear-bumper-kit","title":"1st Gen Tacoma High Clearance Rear Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together rear bumper kit for the 1st generation (1995.5-2004) Toyota Tacoma. It features a bolt-on design, recessed 2\" receiver hitch, and one of the best departure angles on the market. We have acheived this class-leading departure angle by putting the bumper entirely at and above the height of the truck's frame and then adding a 45 degree sloping angle to the rear of the bumper. Pair this with the recessed hitch receiver and you have a smooth bumper surface that will easily slide over obstacles rather than act as a catching point. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles and distracted drivers and has been kept to a weight of 94lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear of the 1st generation Toyota Tacoma (1995.5-2004) as possible, while the recessed hitch receiver and angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. These features make a very noticeable difference during deep ditch crossing and steep obstacle climbs where other aftermarket bumpers with bulky rear profiles and protruding hitch receivers will hang up and impede progress on the trail. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your Tacoma! \u003c\/p\u003e\u003cp\u003eUnlike many aftermarket bumpers that are more or less empty shells with minimal reinforcement, this bumper contains extensive internal ribbing and mounts directly to factory holes in bottom and sides of the Tacoma's frame for unmatched strength and stiffness. The high clearance side wings are linked directly to the frame by stout 2x2\" square support tubes - the same tubing that we use for our rock slider support legs! This ensures that you can drag the side wings over the nastiest of obstacles without any worries of body damage. We know that many Toyota Tacoma owners want to run oversized tires, which often create interference and rubbing issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 37\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe've also taken a unique approach to the way that these wrap-around side wings interface with the truck. With many high clearance wrap around bumpers, the factory bedsides must be cut all the way up to the height of the top of the replacement bumper. This means that the bedside cut line will be visible and that a mis-measured cut can result in an unsightly gap between the bumper and bed. With this bumper, we've decided to wrap the side wings around the side of the bed instead of below it, meaning that even the most hack-job cut will be completely hidden! This takes the stress out of performing an irreversible cut job and ensures you end up with a beautiful end product. Simply follow the provided instructions' simple cutting guide and pictures. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with optional single and dual swing out carriers, a high clearance hitch receiver, LED pod lights (custom cut outs available by request), and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma frame to eliminate any leveraging effects. These recovery points are formed out of laser cut steel plates that pass through the bumper shell and tie directly into the bumper's main mounting points on the Tacoma frame. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 94lbs for the steel bumper and 46lbs for the aluminum version. Considering that this bumper replaces your factory bumper, bedside corners, hitch receiver and associated components, the resulting weight increase to your Toyota Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eThe swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to \u003cstrong\u003e37\" in diameter! \u003c\/strong\u003eBoth carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWrap-around side wings maximize protection and ground clearance \u003cb\u003e(Partial trimming of factory bedsides required) \u003c\/b\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum construction for a lightweight yet very durable overlanding setup (48lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecessed 2\" hitch receiver for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMounts directly to frame using 8 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBumper is pre-drilled with mounting holes for a license plate. If you'd like to get it up higher, our dual swing out comes with a mounting location. Or, for non-swing out bumpers use our No-Drill Tailgate License Plate Mount, which can be found \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/co12970-no-drill-tailgate-license-plate-mount-12970#attr=\"\u003eHere\u003c\/a\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional LED lights include adjustable mounting tabs to mount the lights either on the swing outs or on top of the bumper\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241520924,"sku":"CO4911","price":848.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f8ec427d-51fd-4cda-8983-2f797afded0d.jpg?v=1783513001"},{"product_id":"1st-gen-tacoma-skid-plate-kit","title":"1st Gen Tacoma Skid Plate Kit","description":"\u003cdiv\u003e\n\u003cp\u003eThis is an underbody skid plate DIY weld-together kit for the 1st generation (1995.5-2004) Toyota Tacoma. This 2-piece set mounts using all factory mounting points (no drilling required) and provides excellent protection of the radiator, front differential, engine oil pan, steering rack, transmission and transfer case. To maximize ground clearance, we use a dual angle front plate that tucks in as close to the frame as possible, providing the best approach angle of any skid plate set on the market. We've used a dual-wall construction at the highest impact area as well as multiple ribs that run the length of the skid set. These features make these skid plates drastically stronger than other skid plates on the market which are simply bent into shape with little to no reinforcements and inadequate mounts.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This skid plate set arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eComplete 2-piece set that provides excellent protection of the radiator, front differential, engine oil pan, steering rack, transmission and transfer case \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCoastal Offroad Tree Logo Cut into front skid plate \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum construction for a lightweight yet very durable overlanding setup (65lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaximum approach angle - front plate tucks up as tight to the frame as possible \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRear plate bolts directly to frame using 8 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFront plate bolts directly to frame using 9 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOil drain hole allows for oil changes without skid plate removal \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSlotted mounting holes for hassle-free assembly and installation \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241553692,"sku":"CO0925","price":662.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_fba407f0-bcfa-4f68-be7b-b7db92cacb97.jpg?v=1783513001"},{"product_id":"1st-gen-tacoma-high-clearance-front-bumper-kit","title":"1st Gen Toyota Tacoma High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 1st generation (1995.5-2004) Toyota Tacoma. It features a bolt-on design, protected winch mount, and the best approach angle of any winch bumper on the market. In fact, this bumper protrudes less than 2.5\" from the center of the grill! This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 84lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 1st generation (1995.5-2004) Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 37\" tires. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with two integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma's frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma's frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 84lbs for the steel bumper and 42lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2.5\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (42lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 8 mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eTwo Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated turn signal cut outs \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241586460,"sku":"CO0924","price":785.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_40bf85b4-4e40-4bfe-8af9-7ead72837d63.jpg?v=1783517149"},{"product_id":"2nd-gen-tacoma-winch-mount-kit","title":"2nd Gen Tacoma Winch Mount Kit","description":"\u003cp\u003eThis is a low profile DIY weld-together winch mount kit for the 2nd generation (2005-2015) Toyota Tacoma. It replaces the lower center section of the factory bumper, providing extra protection while still maintaining a mostly stock appearance. The low weight compared to a full fender to fender bumper greatly reduces the effect on your vehicles suspension and handling.  It features a bolt-on design, protected winch mount, integrated recovery points, and LED pod light mounts (Optional light bar cut out available too). It offers excellent protection from trail obstacles and distracted drivers and has been kept to a weight of 60lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThis winch mount comes with an integrated LED pod light mounts (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma's frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Toyota Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 60lbs for the steel bumper and 31lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is almost zero. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProvides a winch mount, offroad recovery points, and LED light mounts while keeping the factory bumper (trimming of factory bumper required) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains most of the factory plastic bumper - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (29lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241717532,"sku":"CO0923","price":542.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_9e2531ee-6662-4ad2-bfb9-aa8ee6289bd5.jpg?v=1783513657"},{"product_id":"2005-2023-tacoma-skid-plate-weld-together-kit","title":"2005-2023 Tacoma Skid Plate Weld-Together Kit","description":"\u003cdiv\u003e\n\u003cp\u003eThis is a drivetrain skid plate DIY weld-together kit for the 2nd and 3rd generation (2005-2023) Toyota Tacoma. This 2-piece set features a bolt-on design, recessed hardware and complete coverage from the front frame crossmember to the rear of the transfer case. This means protection of the radiator, front differential, engine oil pan, steering rack, transmission and transfer case! This skid plate set uses existing holes and mounts on the frame and requires no drilling or vehicle modifications of any kind. Multiple reinforcement ribs run the length of the skid set, making these skid plates drastically stronger than other skid plates on the market which are simply bent into shape with little to no reinforcements and inadequate mounts.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This skid plate set arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eComplete 2-piece set that provides excellent protection of the radiator, front differential, engine oil pan, steering rack, transmission and transfer case \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCoastal Offroad Tree logo cut into front skid plate \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum construction for a lightweight yet very durable overlanding setup (65lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll recessed hardware - there is not a single exposed bolt head on this skid plate set to fall prey to rocks and other trail obstacles. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFront plate bolts directly to frame using 6 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRear plate bolts directly to frame using 6 mounting points- no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOil drain hole allows for oil changes without skid plate removal \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSlotted mounting holes for hassle-free assembly and installation \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241750300,"sku":"CO0922","price":690.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_19a9acd2-798b-4960-8f96-336a14ab83ce.jpg?v=1783513448"},{"product_id":"2005-2023-toyota-tacoma-kickout-rock-slider-weld-together-kit-bolt-on","title":"2005-2023 Toyota Tacoma Kickout Rock Slider Weld-Together Kit (Bolt on)","description":"\u003cp\u003eThese aren't your average tube sliders. The square inner tubes, laser CNC-cut step plates and tapered ends really set these sliders apart. The inner rails and mounting legs are made from heavy wall 2x2\" (50x50mm) square tubing and finished with massive 3\/8\" thick CNC-cut frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them. We fabricate the frame mounting brackets in-house, with each bracket custom tailored to the tacoma's frame profile at each mounting point. This allows us to mount these sliders to the truck using all factory holes in the tacoma's frame. No frame drilling, welding or modification required. With this kit, the provided frame plates spread impact loads evenly over your frame rails by sandwiching the frame rails between front and back 3\/8\" thick pads with 1\/2\" Bolts. This means that in order for these rock sliders to fail, you would have to simultaneously snap the heads off the 1\/2\" diameter bolts and deform the 3\/8\" thick steel brackets enough to lift away from your frame! You can rest assured that these sliders will hold up to whatever trail hits you can throw at them.\u003c\/p\u003e\u003cp\u003eThis mounting design also ensures that those big trail impacts will get spread out over a large area of your truck's frame. Some sliders use skimpy round tubing mounting legs that mount directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through the vehicle's frame under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.\u003c\/p\u003e\u003cp\u003eThese sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck.  To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by professional CAD diagrams. The 6 (3 per side) mounting legs ship over-length so the sliders can be positioned at your preferred angle and distance from the vehicle. Angle them up tight to the rocker panels for maximum ground clearance or set them level to provide a convenient step to access your roof rack. The pictured sliders are set at a 10 degree angle to provide a happy medium.\u003c\/p\u003e\u003cp\u003e• DIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together - everything you need for assembly and installation included\u003c\/p\u003e\u003cp\u003e•NO Drilling, cutting or welding of the actual vehicle required - these sliders can be removed from your tacoma without a trace that they were ever installed.\u003c\/p\u003e\u003cp\u003e• Detailed instructions and diagrams - the step by step directions and professionally made diagrams make these a perfect first welding project\u003c\/p\u003e\u003cp\u003e•Fits 4 Door and Extended Cab Models\u003c\/p\u003e\u003cp\u003e• CNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access to the cabin, roof rack and pickup bed\u003c\/p\u003e\u003cp\u003e•84.5\" Length provides full wheel well to wheel well protection\u003c\/p\u003e\u003cp\u003e• 2x2 1\/8\" wall square tubing inner rails and mounting legs provide excellent foundational support compared to lesser round tube sliders\u003c\/p\u003e\u003cp\u003e• Massive 3\/8\" thick frame mounting plates and gussets distribute forces evenly into your vehicle frame to prevent damage\u003c\/p\u003e\u003cp\u003e•Hilift jack can be used anywhere along the slider length to lift the vehicle\u003c\/p\u003e\u003cp\u003e• 45 degree tapered inner rails to glance off obstacles\u003c\/p\u003e\u003cp\u003e• Sold in pairs\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241783068,"sku":"CO119035","price":860.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_c6fc8713-d5be-4330-8a71-09132b9cb8ad.jpg?v=1783515611"},{"product_id":"2nd-gen-tacoma-low-profile-rear-bumper-kit","title":"2nd Gen Tacoma Low Profile Rear Bumper Kit","description":"\u003cp\u003eThis is a low profile DIY weld-together bumper kit for the 2nd generation (2005-2015) Toyota Tacoma. This bumper provides substantially increased ground clearance and rear end protection over the stock bumper. Once welded together, it is a simple bolt-on installation that requires no modification to the frame or bedsides of the truck whatsoever. The sloping rear profile further increases clearance and provides a smooth surface to slide over trail obstacles. The side wings have been designed to closely follow the lines of the vehicle while providing excellent protection. The bumper also includes an integrated hitch receiver that is recessed into the bumper shell for a clean look and maximum clearance gains. No low-hanging hitch receivers here!\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear frame crossmember of the 2nd generation (2005-2015) Toyota Tacoma as possible, while the angled side wing faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper provide heavy duty plate protection that wraps underneath the vehicle. These side wings will take a serious hit without flexing or deflecting into the vehicle body. The hitch receiver in this bumper is recessed into the bumper so it will smoothly slide over obstacles and ensure you do not get hung up on the trail. These features make a very noticeable difference during deep ditch crossing and steep obstacle climbs where other aftermarket bumpers with bulky rear profiles and protruding hitch receivers will hang up and impede progress on the trail. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your Tacoma! \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with optional single and dual swing out carriers, two integrated light buckets for surface mount LED pod lights (custom cut outs available by request), and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed out of laser cut steel plates that pass through the bumper shell and tie directly into the bumper's main mounting points on the Tacoma frame. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 84lbs for the steel bumper and 41lbs for the aluminum version. Considering that this bumper replaces your factory bumper, hitch receiver and associated components (98lbs in total!), there is actually a resulting weight savings of 14lbs (steel) to 57lbs (aluminum) on your Tacoma. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. We've also kept full usability of the stock spare tire location underneath the bed - even with an oversized spare. \u003c\/p\u003e\u003cp\u003eThe swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to \u003cstrong\u003e37\" in diameter! \u003c\/strong\u003eBoth carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEngineered to provide maximum ground clearance and complement the factory body lines\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (57lb weight savings over the stock bumper + hitch!)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains full usability of factory spare tire location - even with oversized spares\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecessed 2\" hitch receiver for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMounts directly to frame using 10 factory mounting points - no drilling required. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated LED light mounts in the bumper include slotted mounting tabs that give tons of adjustment to fit a variety of lights\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241815836,"sku":"CO0921","price":662.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_8d441193-a434-4462-b9c7-fb02d03bfa77.jpg?v=1783513657"},{"product_id":"2nd-gen-tacoma-high-clearance-rear-bumper-kit","title":"2nd Gen Tacoma High Clearance Rear Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together plate bumper kit for the 2nd generation (2005-2015) Toyota Tacoma. It features heavy duty 3\/16\" plate steel or 1\/4\" aluminum construction, recessed 2\" receiver hitch, and one of the best departure angles on the market. This bumper provides substantially increased ground clearance and rear end protection over the stock bumper. By cutting the factory bedsides up to the bottom of the tail lights, this bumper replaces the most vulnerable part of the truck's bed with low profile plate side wings that will protect your Tacoma from trail obstacles and inattentive drivers alike.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear of the 2nd generation Toyota Tacoma (2005-2015) as possible, while the recessed hitch receiver and angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. These features make a very noticeable difference during deep ditch crossing and steep obstacle climbs where other aftermarket bumpers with bulky rear profiles and protruding hitch receivers will hang up and impede progress on the trail. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your Tacoma! \u003c\/p\u003e\u003cp\u003eUnlike many aftermarket bumpers that are more or less empty shells with minimal reinforcement, this bumper contains extensive internal ribbing and mounts directly to factory holes in bottom and sides of the Tacoma's frame for unmatched strength and stiffness. The side wings of this bumper provide un-interrupted plate protection that wraps underneath the vehicle and into the vehicle frame. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Toyota Tacoma owners want to run oversized tires, which often create interference and rubbing issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 35\" tires. We've also kept full usability of the stock spare tire location underneath the bed - even with an oversized spare. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with optional single and dual swing out carriers, a high clearance hitch receiver, LED pod lights (custom cut outs available by request), and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma frame to eliminate any leveraging effects. These recovery points are formed out of laser cut steel plates that pass through the bumper shell and tie directly into the bumper's main mounting points on the Tacoma frame. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 120lbs for the steel bumper and 59lbs for the aluminum version. Considering that this bumper replaces your factory bumper, bedside corners, hitch receiver and associated components (109lbs in total!), the resulting weight increase to your Toyota Tacoma is surprisingly minimal - only 11 lbs for our steel bumper version and our aluminum actually saves 50lbs. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eThe swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to \u003cstrong\u003e37\" in diameter! \u003c\/strong\u003eBoth carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSlim profile is engineered to provide maximum departure angles and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWrap-around side wings maximize protection and ground clearance \u003cstrong\u003e(Cutting of factory bedsides required)\u003c\/strong\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains full usability of factory spare tire location - even with oversized spares\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum construction for a lightweight yet very durable overlanding setup (61lb weight savings over our steel version) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecessed 2\" hitch receiver for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMounts directly to frame using 10 factory mounting points for unbeatable strength and no drilling required. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBumper is pre-drilled with mounting holes for a license plate. \u003cspan style=\"text-align: inherit;\"\u003eIf you'd like to get it up higher, our dual swing out comes with a mounting location. Or, for non-swing out bumpers use our No-Drill Tailgate License Plate Mount, which can be found \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/co12970-no-drill-tailgate-license-plate-mount-12970#attr=\"\u003eHere\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only) \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241848604,"sku":"CO0920","price":880.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f5b6e8d0-8302-4dfc-b7be-9cfc6aeba15f.jpg?v=1783513657"},{"product_id":"2nd-gen-tacoma-high-clearance-front-plate-bumper-kit","title":"2nd Gen Tacoma High Clearance Front Plate Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together winch bumper kit for the 2nd generation (2005-2015) Toyota Tacoma. It features a bolt-on design, protected winch mount, and one of the best approach angles on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 104lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 2nd generation (2005-2015) Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 104lbs for the steel bumper and 51lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (53lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241881372,"sku":"CO0919","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_0ee45fb3-17e0-431f-9653-9f15e3b51125.jpg?v=1783513656"},{"product_id":"2005-2023-tacoma-extreme-clearance-skid-plate-weld-together-kit","title":"2005-2023 Tacoma Extreme Clearance Skid Plate Weld-Together Kit","description":"\u003cp\u003eThis is our new extreme clearance skid plate DIY weld-together kit for the 2nd and 3rd generation (2005-2023) Toyota Tacoma. This skid plate kit involves re-routing the factory exhaust cross-over and cutting off the low-hanging front frame crossmember on the Tacoma and replacing it with our \u003cb\u003eincluded \u003c\/b\u003eheavy duty crossmember. This not only provides a huge strength increase but also gains a whopping 4.5\" of ground clearance at the front of the vehicle as well as 1\" all along the bottom of the skid plate set. When combined with our Extreme clearance front bumper, it makes for a seamless package that squeezes every possible inch of ground clearance out of your Tacoma all the way from the bottom of the grill to behind the transfer case. This means protection of the radiator, front differential, engine oil pan, steering rack, transmission and transfer case! Multiple reinforcement ribs run the length of the skid set, making these skid plates drastically stronger than other skid plates on the market which are simply bent into shape with little to no reinforcements and inadequate mounts. Due to these features, we recommend the 1\/4\" aluminum version for general trail use and the 3\/16\" steel version for those who like to seek out the hard trails.\u003c\/p\u003e\u003cp\u003eWARNING: This is our Extreme Clearance Skid Plate kit that \u003cstrong\u003erequires cutting and welding your Tacoma's frame as well as re-routing the factory exhaust crossover pipe\u003c\/strong\u003e. For our bolt-on skid plate kit that does not require any permanent vehicle modifications, please see here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-skid-plate-set\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-skid-plate-set\/\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003eWhile the Toyota Tacoma is one of the best offroad platforms available, the frame does have a few limitations from the factory. At the front of the Tacoma frame, there is a low hanging crossmember that hangs down 4.5\" below the actual main frame rails. There are no engine or radiator components located behind this crossmember, just empty space! By cutting off this low hanging crossmember and welding in our supplied heavy duty crossmember in line with the main frame rails, the front bumper and skid plates can then be mounted 4.5\" higher. This gives a ton of extra clearance and approach angle that will transform the offroad capability of your Tacoma. \u003c\/p\u003e\u003cp\u003eMoving further along the skid plate set, clearance has been increased here too. A dropped pocket sits underneath the front differential, which is by far the lowest point of the vehicle in this area. This allows us to move the rest of the skid plate up a full 1\". Three vertical ribs run the length of the skid plate and make it extremely strong compared to typical flat skid plates. We strategically placed these ribs to fit in between the lowest components of the vehicle, so no ground clearance is lost. \u003c\/p\u003e\u003cp\u003eMoving to the rear skid plate, Toyota decided to route an exhaust cross-over pipe so that it sits under the frame. This then requires skid plates to sit much lower than they would otherwise in order to clear these exhaust components. Instead, this skid plate sits directly against the frame crossmember, gaining 1.25\" of clearance under this entire skid plate! \u003cstrong\u003eKeep in mind that this does require cutting and moving this short section of exhaust pipe\u003c\/strong\u003e upwards so that it sits above the bottom of the frame crossmember. This is an easy, straightforward job that any muffler shop will be able to perform. \u003c\/p\u003e\u003cp\u003ePlease take note that the factory front frame crossmember that gets removed serves as the meeting point between nearly all front bumpers and skid plates. This is why we highly recommend running this skid plate set in combination with our Extreme clearance front bumper set for a seamless front to back protection system for your Tacoma that maximizes the clearance gains. \u003c\/p\u003e\u003cp\u003e\u003cb\u003eEnter the code Extremeclearance10 to get 10% off the bumper and skid plates when ordered together! That front bumper kit can be found here: \u003c\/b\u003e\u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-plate-bumper-kit\/\" style=\"font-weight: bold;\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-plate-bumper-kit\/\u003c\/a\u003e\u003cb\u003e \u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eIncludes our heavy duty replacement frame crossmember which also facilitates mounting of our Extreme clearance front bumper kit (See front bumper details here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/2nd-gen-tacoma-extreme-clearance-plate-bumper-kit-1595\"\u003ehttps:\/\/www.coastaloffroad.com\/shop\/2nd-gen-tacoma-extreme-clearance-plate-bumper-kit-1595\u003c\/a\u003e )\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNot Compatible with factory sway bar\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This skid plate set arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eComplete set that provides excellent protection of the radiator, front differential, engine oil pan, steering rack, transmission and transfer case \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e1\/8\" steel, 3\/16\" steel, or 1\/4\" aluminum construction \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll bolt heads are either recessed or accessible from above - never worry about stuck bolts due to mashed bolt heads from rocks and other trail obstacles. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFront plate bolts directly to frame using 7 heavy duty mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRear plate bolts directly to frame using 8 heavy duty mounting points \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOil drain hole allows for oil changes without skid plate removal.\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264241946908,"sku":"CO74649","price":813.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_a8627e3e-6892-48ab-a330-239fd71d9a6e.jpg?v=1783513448"},{"product_id":"2nd-gen-tacoma-extreme-clearance-plate-bumper-kit","title":"2nd Gen Tacoma Extreme Clearance Plate Bumper Kit","description":"\u003cp\u003eThis is our new extreme clearance DIY weld-together winch bumper kit for the 2nd generation (2005-2015) Toyota Tacoma. This bumper kit involves cutting off the low-hanging front frame crossmember on the Tacoma and replacing it with our \u003cb\u003eincluded\u003c\/b\u003e heavy duty crossmember. This not only provides a huge strength increase but also gains a whopping 4.5\" of ground clearance at arguably the most important location of the vehicle! We then went and redesigned our full underbody skid plate set to mate up with the supplied frame crossmember. This makes for a seamless package that squeezes every possible inch of ground clearance out of your Tacoma all the way from the bottom of the grill to behind the transfer case. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 98lbs through careful design work.\u003c\/p\u003e\u003cp\u003eWARNING: This is our Extreme Clearance Plate Bumper kit that \u003cstrong\u003erequires cutting and welding your Tacoma's frame\u003c\/strong\u003e. For our bolt-on bumper kit that does not require any permanent vehicle modifications, please see here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-high-clearance-plate-bumper\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-high-clearance-plate-bumper\/\u003c\/a\u003e \u003c\/p\u003e\u003cp\u003eWhile the Toyota Tacoma is one of the best offroad platforms available, the frame does have a few limitations from the factory. At the front of the Tacoma frame, there is a low hanging crossmember that hangs down 4.5\" below the actual main frame rails. There are no engine or radiator components located behind this crossmember, just empty space! By cutting off this low hanging crossmember and welding in our supplied heavy duty crossmember in line with the main frame rails, the front bumper and skid plates can then be mounted 4.5\" higher. This gives a ton of extra clearance and approach angle that will transform the offroad capability of your Tacoma. \u003c\/p\u003e\u003cp\u003eThis bumper still uses the factory frame stud plates to mount to the vehicle, meaning that there is absolutely no guess-work required when mounting the bumper or welding in the supplied crossmember. The factory frame studs will locate the bumper perfectly on the vehicle, and then the supplied crossmember comes pre-cut with holes for three large 1\/2\" bolts. These 1\/2\" bolts tie the winch plate of the bumper directly into our heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. This also relieves stress from the factory frame stud plates, which are known to be a weak point on the Tacoma. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. \u003c\/p\u003e\u003cp\u003ePlease take note that the factory frame crossmember that gets removed serves as the meeting point between nearly all front bumpers and skid plates. This is why we highly recommend running this bumper in combination with our Extreme clearance skid plate set for a seamless front to back protection system for your Tacoma that maximizes the clearance gains. \u003c\/p\u003e\u003cp\u003e\u003cb\u003eEnter the code Extremeclearance10 to get 10% off the bumper and skid plates when ordered together! Those skid plates can be found here\u003c\/b\u003e\u003cstrong\u003e: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\u003c\/a\u003e\u003c\/strong\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes our heavy duty replacement frame crossmember which also facilitates mounting of our Extreme clearance skid plate set (See skid plate details here: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/)\u003c\/a\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExtreme Clearance design gains 4.5\" of ground clearance \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCenter section of the bumper is made from a single CNC-bent panel for a cleaner look and much less welding and grinding \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts to vehicle frame using 6 factory frame studs as well as 3 massive 1\/2\" bolts for trouble-free winching and recovery pulls \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of surface mount lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242012444,"sku":"CO74215","price":964.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_9ee5a6dd-91f8-4d50-b93f-6bda3ff9f7d0.jpg?v=1783513655"},{"product_id":"3rd-gen-tacoma-flat-top-front-bumper-kit","title":"3rd Gen Tacoma Flat Top Front Bumper Kit","description":"\u003cp\u003eThis is a flat top DIY weld-together bumper kit for the 3rd generation 2016-2022 Toyota Tacoma. It features heavy duty recovery points, a protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, animal strikes and distracted drivers and has been kept to a very reasonable weight of 102lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 3rd generation 2016-2022 Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 102lbs for the steel bumper and 50lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAvailable with Factory Parking Sensor Cut outs - (Please email us or put a comment in your order notes section to receive this option) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains part of the factory plastic bumper for reduced weight - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (52lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePower Steering Cooler Relocation Brackets Included \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242176284,"sku":"CO58135","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_baba01c6-809e-4d07-a0f7-030984540643.jpg?v=1783514095"},{"product_id":"3rd-gen-tacoma-lo-pro-winch-bumper-kit","title":"3rd Gen Tacoma Low Profile Winch Bumper Kit","description":"\u003cp\u003eThis is a low profile DIY weld-together winch bumper kit for the 3rd generation 2016-2022 Toyota Tacoma. This winch bumper is for those looking for full offroad functionality and protection while still keeping a mostly-factory looking front end. It features a bolt-on design, protected winch mount, 9\/16\" thick recovery points and space to mount a 25\" single row light bar. It offers excellent protection from trail obstacles and distracted drivers and has been kept to a weight of 68lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with an integrated 25\" single row LED light bar mount (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma's frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Toyota Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 68lbs for the steel bumper and 33lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Tacoma is almost zero. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains most of the factory plastic bumper - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (35lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to vehicle frame using a total of 10 factory mounting points - no frame drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e25\" single row light bar mount – slotted mounting tabs give adjustment to fit a variety of light bars \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242241820,"sku":"CO4869","price":641.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_258a4dc8-666b-47a6-913d-c57fdbf0d267.jpg?v=1783517151"},{"product_id":"3rd-gen-tacoma-high-clearance-front-bumper-kit","title":"3rd Gen Tacoma High Clearance Front Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together bumper kit for the 3rd generation 2016-2022 Toyota Tacoma. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from trail obstacles, wildlife strikes, and distracted drivers and has been kept to a weight of 102lbs through careful design work.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 3rd generation (2016-2022) Toyota Tacoma as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most Toyota Tacoma owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), a 20\" single row LED light bar mount, an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Toyota Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 102lbs for the steel bumper and 50lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your Toyota Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAvailable with Factory Parking Sensor Cut outs - (Please email us or put a comment in your order notes section to receive this option) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMaintains part of the factory plastic bumper for reduced weight - trimming of factory plastic bumper required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (52lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts directly to frame using a total of 10 factory mounting points - no drilling required \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour integrated LED pod mounts – slotted mounting tabs give adjustment to fit a wide variety of surface mount pod lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated 20\" Single Row LED Light bar cut out - slotted mounting tabs included \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242340124,"sku":"CO4849","price":865.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_62185f78-7aa0-4072-9dbd-d996df92f1b3.jpg?v=1783514362"},{"product_id":"3rd-gen-tacoma-high-clearance-rear-bumper-kit","title":"3rd Gen Tacoma High Clearance Rear Bumper Kit","description":"\u003cp\u003eThis is a high clearance DIY weld-together rear bumper kit for the 3rd generation (2016-2022) Toyota Tacoma. It features heavy duty 3\/16\" plate steel or 1\/4\" aluminum construction, recessed 2\" receiver hitch, and one of the best departure angles on the market. This bumper provides substantially increased ground clearance and rear end protection over the stock bumper. By cutting the factory bedsides up to the bottom of the tail lights, this bumper replaces the most vulnerable part of the truck's bed with low profile plate side wings that will protect your Tacoma from trail obstacles and inattentive drivers alike.\u003c\/p\u003e\u003cp\u003eThe profile of this bumper has been designed with maximum ground clearance and departure angles put first. The bumper sits as high and tight to the rear of the 3rd generation Toyota Tacoma (2016-2022) as possible, while the recessed hitch receiver and angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. These features make a very noticeable difference during deep ditch crossing and steep obstacle climbs where other aftermarket bumpers with bulky rear profiles and protruding hitch receivers will hang up and impede progress on the trail. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your Tacoma! \u003c\/p\u003e\u003cp\u003eUnlike many aftermarket bumpers that are more or less empty shells with minimal reinforcement, this bumper contains extensive internal ribbing and mounts directly to factory holes in bottom and sides of the Tacoma's frame for unmatched strength and stiffness. The side wings of this bumper provide un-interrupted plate protection that wraps underneath the vehicle and into the vehicle frame. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that many Toyota Tacoma owners want to run oversized tires, which often create interference and rubbing issues with the stock bumper. We have thought ahead and specifically designed these bumper side wings to clear 35\" tires. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with optional single and dual swing out carriers, a high clearance hitch receiver, LED pod lights (custom cut outs available by request), and heavy duty 9\/16\" recovery points that are placed directly in line with the Toyota Tacoma frame to eliminate any leveraging effects. These recovery points are formed out of laser cut steel plates that pass through the bumper shell and tie directly into the bumper's main mounting points on the Tacoma frame. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Toyota Tacoma's frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. What could make this bumper even better? The low profile design has resulted in very reasonable weights of 120lbs for the steel bumper and 59lbs for the aluminum version. Considering that this bumper replaces your factory bumper, bedside corners, hitch receiver and associated components, the resulting weight increase to your Toyota Tacoma is surprisingly minimal. This reduces added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired. \u003c\/p\u003e\u003cp\u003eThe swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to \u003cstrong\u003e37\" in diameter! \u003c\/strong\u003eBoth carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly heim joint hinges, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs. \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut and bent pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSlim profile is engineered to provide maximum departure angles and complement the factory body lines \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eWrap-around side wings maximize protection and ground clearance \u003cstrong\u003e(Cutting of factory bedsides required)\u003c\/strong\u003e \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum construction for a lightweight yet very durable overlanding setup (61lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eRecessed 2\" hitch receiver for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMounts directly to frame using 10 factory mounting points for unbeatable strength and no drilling required. \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBumper is pre-drilled with mounting holes for a license plate. If you'd like to get it up higher, our dual swing out comes with a license plate mounting location. Or, for non-swing out bumpers use our No-Drill Tailgate License Plate Mount, which can be found \u003ca href=\"https:\/\/www.coastaloffroad.com\/shop\/co12970-no-drill-tailgate-license-plate-mount-12970#attr=\"\u003eHere\u003c\/a\u003e\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eAll kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only) \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ccode\u003e\u003c\/code\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242405660,"sku":"CO7508","price":880.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_b080c3ab-11d6-413d-9166-3e835a0205c4.jpg?v=1783514362"},{"product_id":"3rd-gen-tacoma-extreme-clearance-flat-top-bumper-kit","title":"3rd Gen Tacoma Extreme Clearance Flat Top Bumper Kit","description":"\u003cp\u003eThis is our new extreme clearance DIY weld-together winch bumper kit for the 3rd generation (2016-2022) Toyota Tacoma. This bumper kit involves cutting off the low-hanging front frame crossmember on the Tacoma and replacing it with our \u003cb\u003eincluded\u003c\/b\u003e heavy duty crossmember. This not only provides a huge strength increase but also gains a whopping 4.5\" of ground clearance at arguably the most important location of the vehicle! We then went and redesigned our full underbody skid plate set to mate up with the supplied frame crossmember. This makes for a seamless package that squeezes every possible inch of ground clearance out of your Tacoma all the way from the bottom of the grill to behind the transfer case. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 98lbs through careful design work.\u003c\/p\u003e\u003cp\u003eWARNING: This is our Extreme Clearance Plate Bumper kit that \u003cstrong\u003erequires cutting and welding your Tacoma's frame\u003c\/strong\u003e. For our bolt-on bumper kit that does not require any permanent vehicle modifications, \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/3rd-gen-tacoma-flat-top-front-bumper-kit\/\"\u003eplease see here\u003c\/a\u003e. \u003c\/p\u003e\u003cp\u003eWhile the Toyota Tacoma is one of the best offroad platforms available, the frame does have a few limitations from the factory. At the front of the Tacoma frame, there is a low hanging crossmember that hangs down 4.5\" below the actual main frame rails. There are no engine or radiator components located behind this crossmember, just empty space! By cutting off this low hanging crossmember and welding in our supplied heavy duty crossmember in line with the main frame rails, the front bumper and skid plates can then be mounted 4.5\" higher. This gives a ton of extra clearance and approach angle that will transform the offroad capability of your Tacoma. \u003c\/p\u003e\u003cp\u003eThis bumper still uses the factory frame stud plates to mount to the vehicle, meaning that there is absolutely no guess-work required when mounting the bumper or welding in the supplied crossmember. The factory frame studs will locate the bumper perfectly on the vehicle, and then the supplied crossmember comes pre-cut with holes for three large 1\/2\" bolts. These 1\/2\" bolts tie the winch plate of the bumper directly into our heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. This also relieves stress from the factory frame stud plates, which are known to be a weak point on the Tacoma. \u003c\/p\u003e\u003cp\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost. \u003c\/p\u003e\u003cp\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations. \u003c\/p\u003e\u003cp\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill. \u003c\/p\u003e\u003cp\u003ePlease take note that the factory frame crossmember that gets removed serves as the meeting point between nearly all front bumpers and skid plates. This is why we highly recommend running this bumper in combination with our Extreme clearance skid plate set for a seamless front to back protection system for your Tacoma that maximizes the clearance gains. \u003c\/p\u003e\u003cp\u003e\u003cb\u003eEnter the code Extremeclearance10 to get 10% off the bumper and skid plates when ordered together! Those skid plates \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ecan be found here\u003c\/a\u003e.\u003c\/b\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes our heavy duty replacement frame crossmember which also facilitates mounting of our Extreme clearance skid plate set (\u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003eSee skid plate details here\u003c\/a\u003e) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExtreme Clearance design gains 4.5\" of ground clearance \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCenter section of the bumper is made from a single CNC-bent panel for a cleaner look and much less welding and grinding \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill! \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings) \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts to vehicle frame using 6 factory frame studs as well as 3 massive 1\/2\" bolts for trouble-free winching and recovery pulls \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of surface mount lights \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount \u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242471196,"sku":"CO93305","price":964.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_6d830ad4-b3f0-4b9c-ad47-9bf590675a3a.jpg?v=1783514094"},{"product_id":"3rd-gen-tacoma-extreme-clearance-front-bumper-kit","title":"3rd Gen Tacoma Extreme Clearance Front Bumper Kit","description":"\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis is our new extreme clearance DIY weld-together winch bumper kit for the 3rd generation (2016-2022) Toyota Tacoma. This bumper kit involves cutting off the low-hanging front frame crossmember on the Tacoma and replacing it with our \u003cspan style=\"font-weight: bolder;\"\u003eincluded\u003c\/span\u003e heavy duty crossmember. This not only provides a huge strength increase but also gains a whopping 4.5\" of ground clearance at arguably the most important location of the vehicle! We then went and redesigned our full underbody skid plate set to mate up with the supplied frame crossmember. This makes for a seamless package that squeezes every possible inch of ground clearance out of your Tacoma all the way from the bottom of the grill to behind the transfer case. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your Tacoma. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 98lbs through careful design work.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWARNING: This is our Extreme Clearance Plate Bumper kit that \u003cspan style=\"font-weight: bolder;\"\u003erequires cutting and welding your Tacoma's frame\u003c\/span\u003e. For our bolt-on bumper kit that does not require any permanent vehicle modifications, \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/3rd-gen-tacoma-flat-top-front-bumper-kit\/\"\u003eplease see here\u003c\/a\u003e.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWhile the Toyota Tacoma is one of the best offroad platforms available, the frame does have a few limitations from the factory. At the front of the Tacoma frame, there is a low hanging crossmember that hangs down 4.5\" below the actual main frame rails. There are no engine or radiator components located behind this crossmember, just empty space! By cutting off this low hanging crossmember and welding in our supplied heavy duty crossmember in line with the main frame rails, the front bumper and skid plates can then be mounted 4.5\" higher. This gives a ton of extra clearance and approach angle that will transform the offroad capability of your Tacoma.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThis bumper still uses the factory frame stud plates to mount to the vehicle, meaning that there is absolutely no guess-work required when mounting the bumper or welding in the supplied crossmember. The factory frame studs will locate the bumper perfectly on the vehicle, and then the supplied crossmember comes pre-cut with holes for three large 1\/2\" bolts. These 1\/2\" bolts tie the winch plate of the bumper directly into our heavy duty crossmember, making for an extremely strong and stiff bumper that will not flex or shift under hard winching and recovery point pulls. This also relieves stress from the factory frame stud plates, which are known to be a weak point on the Tacoma.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eThe main section of this bumper is CNC-bent out of a single piece of  3\/16\" P\u0026amp;O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eWe finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as a light bar version), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9\/16\" recovery points that are placed directly in line with the Tacoma frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the Tacoma frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your Tacoma frame and provide reliable recoveries of heavily loaded vehicles in the worst of offroad situations.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003eDon't want to lose your factory parking sensor system? No problem. This bumper kit can be ordered with CNC-cut ports for each of the 4 factory parking sensors as well as internal routing ports for the factory wiring harness to pass through without any modification or extensions required (Please email us or put a comment in your order notes section to receive this option). Simply pop the sensors into this replacement bumper, route the factory harness through the internal ports, and plug it back into the vehicle. The factory wiring harness is easily removed from the stock bumper and transferred to the Coastal Offroad bumper. This allow you to wire in our LED driving lights and your factory parking sensors right into the Coastal Offroad bumper using the factory wiring harness. When removing the Coastal Offroad bumper from the vehicle, all wiring is then conveniently disconnected all at once via the factory plugs located behind the vehicle grill.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003ePlease take note that the factory frame crossmember that gets removed serves as the meeting point between nearly all front bumpers and skid plates. This is why we highly recommend running this bumper in combination with our Extreme clearance skid plate set for a seamless front to back protection system for your Tacoma that maximizes the clearance gains.\u003c\/p\u003e\u003cp style='font-family: Roboto, \"Odoo Unicode Support Noto\", sans-serif;'\u003e\u003cspan style=\"font-weight: bolder;\"\u003eEnter the code Extremeclearance10 to get 10% off the bumper and skid plates when ordered together! Those skid plates \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003ecan be found here\u003c\/a\u003e.\u003c\/span\u003e \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIncludes our heavy duty replacement frame crossmember which also facilitates mounting of our Extreme clearance skid plate set (\u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/2nd-gen-tacoma-extreme-clearance-skid-plate-weld-together-kit\/\"\u003eSee skid plate details here\u003c\/a\u003e)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eExtreme Clearance design gains 4.5\" of ground clearance\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCenter section of the bumper is made from a single CNC-bent panel for a cleaner look and much less welding and grinding\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLow profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2\" from the center of the grill!\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHeavy duty 3\/16\" plate steel construction for maximum offroad strength and durability\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional 1\/4\" 5052 aluminum for a lightweight yet very durable overlanding setup (49lb weight savings)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eBolts to vehicle frame using 6 factory frame studs as well as 3 massive 1\/2\" bolts for trouble-free winching and recovery pulls\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eProtected winch mount fits all standard 8000-12,000lb winches with removable solenoids\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eReinforced 9\/16\" thick clevis mounts allow the use of 3\/4\" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eFour Integrated LED pod mounts – slotted mounting tabs give adjustment to fit a variety of surface mount lights\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eIntegrated license plate mount\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eOptional heavy duty grill and headlight tubing for added protection\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264242503964,"sku":"CO12975","price":964.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_62213d07-8102-430e-ace7-dd89604406bc.jpg?v=1783516718"},{"product_id":"lower-control-arm-relocation-kit","title":"Lower Control Arm Relocation Kit","description":"\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eFor the past 3.5 years, we’ve been developing a solution to one of the biggest challenges in the Toyota IFS world: clearing big tires without hacking half your truck apart. Today, we’re proud to release our Lower Control Arm Relocation Kit—a simple, low-cost system that provides dramatic improvements in tire clearance, approach angle, alignment reliability, and front-end strength. With this kit installed, you can run 35s, 37s, or even larger with a fraction of the rubbing and cutting normally required.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eBy moving your lower control arms forward a full 1.5 inches (adjustable in ¼” increments), this system shifts your entire tire travel path away from the firewall and body mount. The result is astonishingly improved tire clearance—enough that 35s can fit without touching your body mount or firewall as long as you don’t go too aggressive with wheel offset. 37” tires require only a basic body-mount chop and cutting off the pinch weld. For anyone who has tubbed a firewall before, the difference is night and day. Instead of tearing into the cab, relocating wiring, welding new sheet metal, and losing footwell space, this kit places the tires where they should be and eliminates all of that. You will still need to clearance the top and front areas of your fenders and wheel wells – however the firewall and body mount modifications are massively reduced.  \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eApproach angle also sees a massive upgrade. Moving the axle line forward by 1.5\" gives you the same front-tire leading edge as jumping from a 35\" to a 38\" tire—without the cost, weight, or drivetrain strain of actually upsizing. Paired with a high-clearance bumper, your front end begins crawling obstacles significantly sooner and with far less effort, all while allowing you to maintain a lower, more stable suspension height.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eBeyond clearance, this system solves two of the Toyota IFS platform’s biggest reliability issues: bent alignment cam tabs and seized factory cam bolts. The factory setup is notoriously weak—cam tabs fold over on the trail, alignment cams rust and seize into the control arm sleeves, and many owners end up cutting out hardware just to get their truck aligned after new suspension. Our kit replaces all of that. In its place is a proprietary ¼\"-steel cam system that is nearly indestructible and keeps your alignment locked in no matter how hard you wheel.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eStrength is a major part of this system. The factory lower control arm mounts are thin, exposed, and easily damaged on technical trails. Our relocation brackets are built from ¼\" steel and feature heavy gusseting, additional tie-ins, and reinforcement that transforms this weak point into a true structural component of the frame. During three and a half years of testing—including running  Trepador bias-ply tires on beadlock wheels (125lbs per corner!)—we broke virtually every other part of the front end (CVs, tie rods, racks, diff, spindle…) but never the LCA mounts or alignment system. Alignment has remained true the entire time.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eInstallation is far easier than it looks. With the included jigging spacers and step-by-step instructions, this kit can be installed at home with a basic welder and angle grinder. Only the CV axle and lower control arm need to be removed; the steering, coilovers, UCA, brakes, and spindle can all stay on the truck. It also requires the least cutting of any solution on the market—only the front factory LCA tabs are removed. The rear tabs remain and serve as structural reference points.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eAnd another unexpected benefit of this system: no need for aftermarket UCAs for caster correction. By moving the lower arm forward, caster naturally increases and allows you to achieve great alignment specs with a lifted truck. That means improved road manners, stronger return-to-center, and high-speed stability that lifted Toyotas on big tires rarely experience. And our alignment cams work exactly the same as the factory cams, so any alignment shop can align the truck exactly the same way they would using factory cams.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eThis system is compatible with factory, mid-travel, and long-travel control arms as well as aftermarket skid plates. It is compatible with the factory skid plates with very minor trimming of the skid plate. One note is that some coilovers with a larger diameter near the bottom mount may interfere with the tie rods in the full +1.5” position. In this case, you may need to run this system in the +1.25 or +1.0” position instead. Sway-bar relocation brackets are included. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e---------------------\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003eProtected by International and U.S Patent Applications: PCT\/IB2022\/059987 and US 19\/114,525\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Moves your front tires forward a full 1.5” (adjustable in ¼” increments)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Makes clearing 35 and 37\" tires dramatically easier (far less cutting and tubbing required)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Provides a huge improvement in approach angle\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Replaces the weak factory alignment cams \u0026amp; tabs that are infamous for bumped alignments and seizing into the control arms\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Reinforces and replaces thin OEM Lower control arm tabs with ¼” steel brackets and gussets\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Eliminates the need for aftermarket UCAs for caster correction on lifted trucks - this kit increases your caster naturally as its moved forward\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Alignment cam adjustment works just like the factory cams - get an alignment at any tire shop\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Requires minimal cutting of the factory control arm tabs\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Compatible with high-clearance bumpers for maximum performance\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Allows lower lift heights while clearing larger tires - giving you a more stable ride on and off road\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Tunable design works with factory, mid-travel, or long-travel setups\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Includes sway-bar relocation brackets and is compatible with factory and aftermarket skid plates (very minor skid plate trimming may be required)\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size: 13px;\"\u003e•Proven through extensive testing with a 128lb wheel\/tire setup - zero failures\u003c\/span\u003e\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54264247845148,"sku":"CO13040","price":888.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_b377d489-1015-496f-a868-573434026866.jpg?v=1783516720"},{"product_id":"1st-gen-tacoma-kickout-rock-slider-weld-together-kit","title":"1st Gen Tacoma Kickout Rock Slider Weld-Together Kit","description":"\u003cp\u003eThis is a DIY weld-together rock slider kit for the 1st gen tacoma. These aren't generic round tube sliders that are prone to excessive flex and damaging the vehicle they are supposed to protect. The heavy duty square inner rails, laser CNC-cut step plates and tapered ends really set these sliders apart. The inner rails and mounting legs are made from 2x2\" square tubing and finished with massive CNC-cut frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them.\u003c\/p\u003e\u003cp\u003eSome sliders use skimpy round tubing mounting legs that weld directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through them under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails and provide a huge amount of surface area to place your welds. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.\u003c\/p\u003e\u003cp\u003eThese sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck. Simply put, these sliders make for a perfect first-time welding project! To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by professional CAD diagrams. The 8 (4 per side) mounting legs ship over-length so the sliders can be positioned at your preferred angle and distance from the vehicle. Angle them up tight to the rocker panels for maximum ground clearance or set them level to provide a convenient step to access your roof rack.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together - everything you need for assembly and installation included\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDetailed instructions and diagrams - the step by step directions and professionally made diagrams make these a perfect first welding project\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access the cabin, roof rack and\/or pickup bed\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e84\" Length provides wheel well to wheel well protection for your Xtra cab or Double cab Tacoma (for regular cab Tacomas, use our 65\" Kickout Rock slider kit: \u003ca href=\"https:\/\/www.coastaloffroad.com\/product-page\/65-weld-on-rock-slider-kit\/\"\u003ehttps:\/\/www.coastaloffroad.com\/product-page\/65-weld-on-rock-slider-kit\/\u003c\/a\u003e)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2x2 1\/8\" wall square tubing inner rails and mounting legs provide excellent foundational support compared to lesser round tube sliders\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMassive 3\/16\" steel frame mounting plates and gussets distribute forces evenly into your vehicle frame to prevent frame damage\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eHilift jack can be used anywhere along the slider length to lift the vehicle\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e45 degree tapered inner rails to glance off obstacles\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eSold in pairs\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54289155653916,"sku":"CO74654","price":782.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_f828b6fe-37ca-4f1b-9201-6b02206bcd0e.jpg?v=1783585362"},{"product_id":"steering-rack-double-shear-mount","title":"Steering Rack Double Shear Mount","description":"\u003cp\u003eSteering rack reliability is a well-known weak point on IFS Toyotas running front lockers and 35+ inch tires. Under hard off-road use, the factory steering rack mounting system allows the rack to flex against the frame crossmember, placing significant strain on the steering rack bushings, seals, tie rods, and surrounding steering components. This deflection can lead to premature steering rack failure, increased wear on steering components, and in extreme cases, deformation of the factory frame crossmember itself. Our Steering Rack Double Shear Mount Kit reinforces the factory mounting system by distributing steering loads across a much larger area of the frame and securing the rack in a far stronger double-shear configuration. The kit includes heavy-duty 3\/8\" steel weld-on reinforcement plates and precision CNC-bent 1\/4\" steel brackets that work together to dramatically reduce steering rack movement, improve steering durability, and increase confidence when tackling difficult terrain.\u003c\/p\u003e\u003cp\u003e•Double-shear mounting design provides significantly improved strength over the factory setup\u003c\/p\u003e\u003cp\u003e•greatly reduces steering rack deflection, resulting in less stress on the steering rack, tie rods and frame crossmember\u003c\/p\u003e\u003cp\u003e•Helps prevent premature steering rack seal and bushing failure\u003c\/p\u003e\u003cp\u003e•Designed for vehicles running larger tires, front lockers, and demanding off-road use\u003c\/p\u003e\u003cp\u003e•Weld-on Installation required\u003c\/p\u003e\u003cp\u003e•Includes 3\/8\" steel weld-on brackets, 1\/4\" CNC-formed steel brackets, and mounting hardware\u003c\/p\u003e\u003cp\u003e•\u003cspan style=\"text-align: inherit;\"\u003eCompatible with factory Toyota 4Runner, Tacoma, FJ Cruiser and Lexus GX steering racks\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e•Also compatible with Toyota Tundra steering rack upgrade\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54289159389468,"sku":"CO13118","price":94.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_6159c30b-6fdc-4f6a-9922-753f4ed2c233.jpg?v=1783585614"},{"product_id":"front-differential-carrier-mount-reinforcement-kit","title":"Front Differential Carrier Mount Reinforcement Kit","description":"\u003cp\u003eThis kit provides 4 gusset plates that are laser cut from 1\/4\" thick steel. Each of the 4 gussets is specifically shaped to match the unique profile of the left and right factory carrier mounting arms. We have made these gussets as large as possible to provide maximum strength gains without interfering with the surrounding factory steering rack components.\u003c\/p\u003e\u003cp\u003eThe factory carrier mounting arms must be removed from the vehicle in order to weld on our gussets. However, they are very accessible and can be quickly unbolted from the vehicle without removing the differential or any other components (Refer to the pictures taken under the vehicle).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e***Please note that only the 1\/4\" steel gussets are included in this kit.\u003c\/strong\u003e The factory Toyota Front Differential Carrier Mounts are NOT included. If you need to replace those, you can source them from a vehicle part out, auto recycler, or directly from Toyota (  Toyota #52380-04061 for Driver Side and Toyota #52380-04071 for Passenger Side)\u003c\/p\u003e\u003cp\u003e•Constructed from CNC-Laser cut from 1\/4\" Steel\u003c\/p\u003e\u003cp\u003e•Each of the 4 gusset in this set is shaped to fit the unique inner and outer profiles of the left and right arms\u003c\/p\u003e\u003cp\u003e•Welding Required\u003c\/p\u003e\u003cp\u003e•Fits the following vehicle models:\u003c\/p\u003e\u003cp\u003e-2003-2024 Toyota 4Runner\u003c\/p\u003e\u003cp\u003e-2005-2023 Toyota Tacoma\u003c\/p\u003e\u003cp\u003e-2007-2013 Toyota FJ Cruiser\u003c\/p\u003e\u003cp\u003e-2003-2024 Toyota Land Cruiser Prado 120\/150\u003c\/p\u003e\u003cp\u003e-2003-2024 Lexus GX460\/GX470\u003c\/p\u003e","brand":"Coastal Offroad","offers":[{"title":"Default Title","offer_id":54289168498972,"sku":"CO12805","price":61.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/8659\/8684\/files\/image_1920_72289536-0f08-4b29-a9a4-30642391dcd1.jpg?v=1783585789"}],"url":"https:\/\/shop-nz.dev-everfruitdigital.com\/collections\/toyota-tacoma.oembed","provider":"Coastal Offroad","version":"1.0","type":"link"}